street trucks Archives (2024)

SEMA Show 2023 Unveiling the Automotive Industry’s Pinnacle

January 24, 2024 by BRANDON BURRELL

The Largest Automotive Event in the World

When it comes to automotive events, you’ll find nothing larger or more recognized than the SEMA Show. While most people perceive this event to be a car-and-truck show, it isn’t. It’s an industry-only trade show designed for aftermarket manufacturers, distributors, and related companies to network and show off the latest and greatest parts.

Are most of these parts installed on top-notch vehicles? Yes. Are there more high-end builds than any other automotive event? Yes. So, in a way, you can say it’s a “show” but on a totally different level.

Each year people from all over the world travel to Las Vegas the first week of November to attend this event, and this was the 60th year they have done so. SEMA organizers recorded more than 130,000 attendees with 70,000-plus buyers and 3,000-plus media personal, all from over 140 countries. While the size of the crowd was massive, the size of the venue was even more impressive: With over a million square feet indoors plus all the massive outdoor areas, attendees had literally no way to see every vehicle.

Engaged Media, the parent company of Street Trucks magazine and our sister titles, sent the editorial team to SEMA so that we could give our readers the best truck coverage possible. The company also hosted a booth in the Central Hall, right in the middle of Hot Rod Alley. In the booth, we debuted our Sergeant Square C10 build you’ve seen for several months throughout the build process, which was done to benefit Mission 22. The booth stayed packed from opening to closing each day as attendees stopped by to salute the Sergeant in person.

We also debuted our Project Stockish, a ’23 Sierra build you’ve also seen on these pages. It starred in the Dropstars Wheels booth after making its way from North Carolina to Las Vegas to represent the wheel company as well as Street Trucks.

To get you the best print and digital coverage in the world, we packed our most comfortable shoes and stocked up on plenty of water and energy drinks to prepare for the miles we would walk each day as we tracked down the best trucks and the newest products.

This is one event we refuse to miss. And because it’s open only to the automotive industry, it’s a must for us that we attend to bring you as much coverage as possible. Follow our social media pages as well as the Motortopia YouTube channel for even more content from the show!

OBS Truck Door Handles: Part Three Unveiled

November 27, 2023 by MARK OJA

Replacing Inner and Outer Door Handles

There is nothing more frustrating than a broken door handle! The inside door handle on a OBS is a frequently used component that wears out and breaks over time. Worn out door pins and bushings can also lead to premature inner handles breaking.

The outer door handle can show signs of wear and tear, too. As it is crucial for accessing the vehicle, a faulty outer door handle can be quite inconvenient. Our shop dually has a broken driver-side handle. It still functions, but it is really annoying.

LMC truck supplied a new handle complete with clips. So let’s go through the process of replacing the inner and outer door handles on your OBS. There is a trick to getting this done easily without disconnecting all the inner panel wiring and rod , so follow along and restore functionality and enhance the overall appearance of your truck. Let’s do it!

INNER DOOR HANDLE

OUTER DOOR HANDLE

SOURCES

LMC Truck
800-562-8782
www.lmctruck.com

Hot Rod Power Tour’s Epic 29th Annual Southeast Adventure

November 21, 2023 by BRANDON BURRELL

Event Cruises Through the Southeast US

When it comes to iconic automotive events across the country, the Hot Rod Power Tour is probably one of the largest and most well-known. This year’s event marked the 29th annual event and worked its way throughout the Southeast US.

But before we get into this year’s event, let’s go back to where it all started. Back in late 1994, the editors of Hot Rod Magazine wanted to draw attention to several of its events known as the Hot Rod Power Festival Series. They decided that instead of flying to all the various cities where the events were happening, why not drive their hot rods and custom vehicles from city to city?

Being this was before the internet was what it is today, they advertised this trip in the magazines and had no clue if it would be a flop or a massive event. Much to their surprise, on the kickoff date of May 13, 1995, the first leg of the trip left from the Petersen Automotive Museum in Los Angeles and had 200 vehicles while supporters stood on the streets cheering them on. Moving to the second annual event in 1996, the traffic jam was so large that it was covered as a news event locally as it left the Petersen Automotive Museum again. The goal for the Power Tour was to give enthusiasts a chance to drive their show vehicles and not just have them sit at a car show.

Fast forward to this year’s event, which started at the Atlanta Motor Speedway on June 12, 2023, for its 29th annual event, the turnout was the largest it has ever been with more than 6,000 participants. While last year’s tour was covered by Street Trucks staff members, this was my first time ever doing the trip. This tour has always been on my bucket list, but it was either too far away for me to make it, it fell the same dates as other plans, or I couldn’t get off work that long and make the trip, so I had never been able to do it—until this year.

I had planned to drive one of my vehicles, but when I found out a group of local friends were making the long haul trip, which hits all five locations along the route for the week-long event, it made more sense for me to hop in and play passenger princess so I could take photos and video for you guys throughout the week instead of holding a steering wheel for the 1,400-mile trip. Don’t worry, there was no iced lattes or cake pops involved, but plenty of energy drinks and gas station junk food were consumed throughout the week.

After the first day checking in and waiting in long lines to get into the racetrack and check out the vendors and tons of custom vehicles, there was some cool “run what you brung” autocross passes. All that was needed was a helmet and a valid driver’s license. There was also plenty of drag races by normal participants down pit row as well, through the event staff closely monitored the passes.

Once back to the hotel, it was like a typical car show hotel with folding chairs, adult beverages, and plenty of car talk. The crazy part is that it wasn’t just one or two hotels, but it was every hotel anywhere near the show venue. Back up to early the next morning, the event promotors had lined out a back road route that, for the most part, kept vehicles off the interstates and running through small town USA where, just like the very first year back in 1995, crowds stood along intersections and in front of businesses, waving and cheering as the rides passed by. With this many vehicles, it was hours of cool vehicles driving through.

Every day of the event was more backroads and small towns. This gave the trip a little more of a close-knit feeling than it would on a big highway. Every gas station had plenty of cool rides filling up and people grabbing snacks. One of the coolest parts to me was all the kids standing in the crowds taking photos and waving. To see the next generation of gearheads’ eyes lighting up when something cool rolled by is what keeps us pushing to bring you (and the next age group of readers) the best magazine we can to keep this hobby of ours going.

The second day of the event was a drive from Atlanta to Columbia, South Carolina, which was held at the South Carolina State Fairgrounds. This location also had plenty of vendors, bands, and events throughout the day.

The third day, we left Columbia and went to Rockingham Speedway in Rockingham, North Carolina, where the lines to get in were even longer. We opted to pull off to the side of the road near the entrance and watch the ever-growing lines of hot rods and cool trucks roll in before we pulled inside.

Wednesday morning, we were up bright and early again to head to the zMAX Dragway in Concord, North Carolina. Here they were letting participants run down the official drag strip, which, if you came with a group of people, let you safely race a buddy and see who got to take home bragging rights.

Thursday morning, we left Concord and headed up the mountain to the Bristol Motor Speedway in Bristol, Tennessee. This was probably one of the most scenic routes of the week as it went through several small mountain towns, several with just one red light. After a week of perfect weather and zero issues, one of our crew lost his brakes but managed to safely get stopped at a gas station where a quick bleed of the front brakes and topping off the brake fluid got us back on the road. Random people at the gas station asked if they could help of if they could loan us tools. To me, that level of camaraderie is what this event was all about. Strangers from all over the country that were there for the same reason we were, stopped to help.

Once to the final stop of the week, a quick pass through the venue and it was time for the trip back home. Throughout the week, there were stations to get your pass stamped at each venue so on the last day, you could get the Long-Haul plaque and certificate that you made the weeklong journey. That was a bucked list checkmark for sure!

If you ever have a chance to make one of these events, even if it’s just for one or two of the stops they make, do it! Even with this under my belt, I would do it again in a heartbeat.

Unleashing Perfection: The Extraordinary ’79 Unibody Chevy Pickup by Ricky Holly

June 21, 2023 by John Mata Jr.

Ricky Holly’s Incredible ’79 Unibody Chevy Pickup

Ricky Holly is a name that we’ve all grown accustomed to hearing over the years. He’s been turning out the craziest vintage Chevy trucks that have only gotten better. You’ve seen his builds at the biggest shows across the country. You’ve seen his trucks on the covers and pages of the industry’s leading publications. You’ve seen pictures and videos of his creations posted and shared across all social media platforms. At this point, you have also most definitely been inundated with the praise surrounding his latest project—this ’79 Unibody Chevy pickup that has been the buzz of the custom pickup community since its grand unveiling at SEMA ’22. If for some reason you don’t already have every square inch of this truck ingrained in your memory bank, let’s get reacquainted with all its glory.

While it is rather difficult to look at this truck and select one characteristic to claim as its most notable, we’d have to say that the unibody design is the most eye-catching. His ultimate goal was to have this particular modification blend right in with the truck’s natural styling, but it does shine bright as a huge accomplishment to keen eyes.

BLAZER PLUS A SQUARE

To get this effect just right, Ricky entrusted the job to his longtime go-to paint and body shop, Alamo Customs in Alvin, Texas. Together, Ricky and the team at Alamo have produced some of the baddest classic Chevy truck projects out there, and this one might just sit at the top of the heap. The guys successfully fused the body of a ’79 Blazer with that of an ’85 Squarebody C10 pickup to create the well-proportioned unibody shell.

With that major portion of bodywork completed, the guys at Alamo then started creating more one-off touches to make Ricky’s truck, which gained the name Lolita around this point, that much more unique. At the front, a custom grille with motorized headlight panels was fabricated. At the rear, the guys came up with a tricked-out tailgate and bumper that elevate the truck’s subtle yet highly sophisticated restyling. United Pacific was sourced to provide fresh headlights, taillights, and mirrors for cleanliness sake, but it was ultimately the way these parts were painted that really changed things up.

TRICK PAINT

Custom-mixed PPG maroon and tan colors were stirred up to serve as the main two-tone paint scheme, which was to be broken up by replacement body molding from Mar-K. It was actually the other colors and effects used on the truck that made an equally if not more impactful impression. Both bumpers along with the side mirrors are not, in fact, brushed metal. The guys used paint to get the exact color and finish they had in mind, as there was no chance of running any piece of chrome on this truck per Ricky’s request. If you’ve been attempting to analyze the grain to figure out what type of wood was used for the flooring inside the full-custom bed, you might be surprised to know that it is also just paint—no planks. Actually, all of the wood trim found all throughout the truck has been specially painted to mimic the appearance of actual exotic lumber.

Just like the rest of Ricky’s previous high-profile Chevy truck builds, this custom unibody was slated to drive at the lowest altitude possible. Another Texas business, Acme Chassis Factory in South Houston, was contacted to create a custom frame for the build that would deliver on the low-slung appearance along with excellent ride quality. To assist in creating that ride quality, nothing but top shelf air-ride components were ordered from Slam Specialties ‘bags, Air Lift air management parts, Seamless air tanks, and more. While the pandemic did slow the delivery of certain items, DRU Custom Builds of Pasadena, Texas, was on-hand patiently waiting to piece and plumb the suspension system together as the parts steadily flowed in.

From the Snowden seats covered in Apex leather, the custom dash, flooring, door panels, and center console, the interior landscape has been kept very high-end at every turn.

The all-important decision of which wheel to run is always a tough decision for Ricky. He knew the roundabout size he could get away with once the chassis was in place, and he usually tends to gravitate toward smooth, timeless designs. Well, he most definitely chose a winner once again with the set of 22×8.5 and 24×12 Raceline Newport wheels he picked for this project. The hoops have been brushed, and the spoke centers have been treated to a splash of color that really spices up the exterior color palette.

UNDER THE HOOD

Ricky was interested in rooting down a big, powerful engine that he could really mash on when he gets the urge, which happens way more often than you’d realize. To make the most of the available space under the hood, LT Swap King in Crosby, Texas, was contacted to help lock down a supercharged 2018 LT4 from a ZL1 Camaro. This was the perfect powerplant for the situation, and once it was mounted, wired up, and outfitted with a Brian Tooley Racing camshaft, Sanderson headers, and a Magnaflow exhaust system, Ricky was looking at 750hp. This is an ideal horsepower count for the type of driving he likes to get down on at the track.

If you’ve paid attention over the years, all of Ricky’s trucks are designed and built to operate just as good as they look. To finish out the engine transplant, an amazing collection of panels and vents were fabricated and painted to elevate the whole vibe of the engine compartment, which is more posh and luxurious than should even be allowed under the cover of a hood.

AWARD-WINNING INTERIOR

The next phase of the build is what actually earned the truck an award at last year’s SEMA show. Chris Pate at MTI (Mobile Toys Inc.) in College Station, Texas, poured his heart and soul into the creation of this Chevy’s cab space. From the Snowden seats covered in Apex leather, the custom dash, flooring, door panels, and center console, the interior landscape has been kept very high-end at every turn. Other noteworthy amenities include Dakota Digital gauges, a well-rounded sound system, Vintage Air A/C, a one-off Raceline steering wheel, and plenty of invaluable style and craftsmanship. All of this was good enough to take home Best Truck Interior honors at the largest automotive event on the planet!

To circle back to what was said at the beginning of this story, it’s incredibly hard to crown one single facet of this truck as most notable. This truck might just be a milestone for classic Chevy truck builds as a whole. While Ricky Holly is used to owning super high-quality pickups, this one has to feel a tad bit different. As always, his best truck is always the next one to come, so we are anxiously awaiting seeing what on Earth he could possibly top this build with. Until then, we’ll go ahead and leave the bar right where Ricky and his most trusted shops and fabricators have left it.

Truck Specs

Owner
Ricky Holly

1979 Chevy Blazer
Houston
Holly Boyz

Engine & Drivetrain

Shop: LT Swap King, Crosby, TX
2018 Supercharged LT4 V-8
Brian Tooley Racing stage 2 camshaft
Sanderson headers
Magnaflow 2.5-inch exhaust system
2018 10L90 transmission
One-off paneling under the hood

Chassis & Suspension

Acme Chassis Factory, South Houston, TX
Custom-made frame
Custom fuel tank
Slam Specialties ‘bags, Air Lift air management, dual Viair compressors, Seamless air tanks and other air components installed by DRU Custom Builds (Drops ‘R Us), Pasadena, TX

Wheels, Tires & Brakes

22×8.5 and 24×12 Raceline Newport wheels
Lionhart tires
Wilwood 14- and 13-inch brakes (front and rear) and master cylinder

Body & Paint

Shop: Alamo Customs, Alvin, TX
Custom mix PPG maroon and tan paint
Made from a Blazer to a unibody truck
Mar-K bed flooring and body molding
Custom grille and headlight panels
United Pacific Industries headlights and mirrors
Mirror, bumpers and bed floor painted for effect
Custom wrapped details by Pixelwerks, Houston

Interior & Sound

Chris Pate @ Mobile Toys Inc. (MTI), College Station, TX
Snowden seats covered in tan Apex Leather
Dakota Digital gauges
Raceline steering wheel
Custom dash, floor, and center console
Sony receiver
Gladen/Mosconi audio components
Vintage Air A/C
Ididit steering column

Preserving the Past: Protecting and Enhancing the Patina on a 1967 Chevy C10

June 7, 2023 by Josh McPherson

Protecting the Patina on a 1967 Chevy C10

If you’re like me, you LOVE original-paint classic trucks. There’s something about looking over the original paintjob and getting a glimpse at how the truck was treated—or abused—in the past. My OG paint ’67 C10 has a lot of character and most of it came from work on a farm. Now that this original-paint beauty earned its stripes and now resides indoors, it’s time to protect that original paint that has been neglected for 56 years. There are a couple of different ways you can protect and preserve your original paint.

1. Clearcoat the Original: You can go with a more permanent solution by applying a clearcoat over the original paint. I have never been a fan of this method. If the clearcoat were to ever fail, it is highly unlikely that one would be able to strip just the clearcoat off of the original paint, which means you may have to strip the entire vehicle. While there is essentially zero maintenance on this method, the risk of losing or damaging the original paint is too high for me. If this is the route you would like to go, Sweet Patina sells a matte and gloss clearcoat designed specifically for preserving patina.

2. Go with the Sweet Sauce: You can use a product like Sweet Patina “Sauce” that acts similarly to a carnauba wax. Not only are you preserving and protecting the paint, but you’re also not applying a permanent topcoat, so there is no risk for this product to fail since it naturally wears off the paint over time. This method does require you to reapply the “Sauce” a couple of times a year, but it’s so easy to do and essentially has zero risk of damaging the paint. This is the method I prefer to use, and that’s where Sweet Patina comes into play.

Sweet Patina has developed a product it calls the patina “Sauce” that has more than 20 ingredients that make up the proprietary blend, making the product one-of-a-kind. The patina “Sauce” provides a luminous finish that shows the character, depth, and beauty of your patinaed ride. It helps prevent further deterioration, preserve the patina, offer a layer of water-resistant protection that helps inhibit rust, and polymerize to a hard finish.

Enhance Performance and Style: Step-by-Step Guide to Installing an Eddie Motorsports S-Drive on a 350 SBC

May 23, 2023 by BOB RYDER

Installing an Eddie Motorsports S-Drive on a 350 SBC

There is no better way to add “wow” factor to your engine’s appearance and performance than by installing a high-quality serpentine pulley component system.

Eddie Motor Sports in Rancho Cucamonga, California, offers its S-Drive pulley system, which comes complete with a six-rib serpentine belt that’s routed by CNC-machined 6061T6 aluminum pulleys. The S-Drive pulley systems include all of the necessary stainless steel fasteners and high-quality, name brand components, including an Edelbrock water pump, Marval power steering pump, Powermaster alternator, Sanden A/C compressor and Gates belt tensioner and six-rib serpentine belt. The kits are available in raw machined or highly polished finish or in a variety of anodized Fusion-coat colors.

Follow along as John Mutch at Savi Ranch Automotive installs an Eddie Motorsports S-Drive serpentine pulley system on a Chevy 350 small-block.

SOURCES

Eddie Motorsports
888.813.1293
Eddiemotorsports.com

Savi Ranch Auto Care Center
22945 Savi Ranch Pkwy.
Yorba Linda, CA 92887
714.282.7498

Reviving a Piece of Racing History: Restoring the 1993 Chevy Indy 500 Pace Truck to Its Former Glory

May 19, 2023 by John Mata Jr.

If you follow NASCAR or any other type of car racing, then you may already be familiar with the Indy 500’s longstanding tradition of introducing a different pace car just about every year to kick off the race. The official pace car of 1993 was the “new” Chevy Camaro Z28, which was selected to celebrate the launch of its fourth-generation model.

The Z28 wasn’t the only Chevrolet vehicle to be put on a pedestal this particular year. A special Indianapolis 500-edition shortbed C1500 pickup truck was also released to the public to commemorate the company’s participation in the big race. Only 1,534 of them were built and sold, and all of them sported the same very distinctive two-tone black and white paintjob adorned with multicolor logos and graphics to signify it as being part of the limited-edition run.

THE STARS ALIGN

These trucks pop up for sale every now and then in various conditions and price points, but they still remain somewhat hard to find below market value. Ty Zito of Prairieville, Louisiana, has been a fan of the Indy 500 Chevy truck for years but has always been hesitant to pull the trigger and purchase one. These pickups are sometimes placed on the chopping block by various automotive auction houses, but every now and then, one will surface on Craigslist for a steal. Ty had always kept his eyes on sales listings of these trucks, but having the disposable funds ready to strike when one pops up, as well as it being close enough to pick up, have proved to be the make-or-break factors of scoring one.

After years of searching, however, the stars aligned for Ty in Owensboro, Kentucky. An Indy truck was listed for sale at a price he was willing to pay. And while the drive was a little too far for him at that time, he lucked out when Chris Stafford of C/K Syndicate agreed to go fetch the truck on his behalf. Game on!

START WITH SUSPENSION

While the truck was in fair enough condition, it was in need of some serious TLC to bring back the luster of its glory days. Before anything was buffed or polished though, Ty first started to analyze what could be done to refresh the Chevy’s suspension.

Chris Stafford once again offered to be of service for this phase of the rebuild. He welded a notch under the bed before installing a coilover conversion kit and narrowed A-arms from Stone Fab, which would allow easy compatibility with front Aldan coilover units. A Belltech flip kit, sway bar, and Aldan adjustable shocks are responsible for dropping the rear to give the C1500 a much lower, aggressive stance for a modernized, custom appearance.

While upgrading the truck’s chassis, Chris also upgraded the front brake system with drilled and slotted rotors from Little Shop MFG. He went with the company’s rear disc brake conversion and master cylinder swap kit for all-around performance stopping power. To capitalize on the truck’s fully revamped chassis, a staggered set of Intro ID313 wheels and Lionhart tires were mixed in to give Ty’s Indy 500 pickup the updated, sporty appearance it so desperately deserved.

REWORK AND REFRESH

To keep the Chevy as original as possible where it counted the most, Ty kept the factory-equipped 350 V-8, but he had Joe Gerbitz and Mikey Stinson of 3rd Coast Customs perform a simple engine rebuild while cleaning it up cosmetically for good measure. New valve covers and an air cleaner were included in the cleanup process, and to add some extra performance gains, Brent Kelly at Exhaust Pros was asked to fabricate a custom 3-inch exhaust system. Other than that, the engine bay was kept relatively untouched, which is really all that was necessary to help preserve this historical pickup project.

Next, T.J. Maples and Joe Gerbitz of 3rd Coast gave the Indy 500 Chevy’s original paint a welcomed refresh. They also reworked the OEM grille and bumpers and replaced the truck’s lighting housings to give the Chevy a spruced-up shine from front to back. Again, there was no need to do anything more than simply restore the truck’s OG façade as its iconic factory style is what has made it as desirable as it has been for nearly 30 years.

FACTORY PLUS

When it came time to address the Chevy’s interior, Ty treaded lightly as to not destroy the natural styling within the cab. While he had no reason to suffer with the dated cloth upholstery and cracked plastics that do deteriorate over the years, Ty wished to create a familiar environment that even the strictest of purists could appreciate. Since Ty’s truck was equipped with a bench seat (only 414 of the 1,534 run were outfitted with factory bucket seats), Lawrence Bergeron of LB Upholstery suggested swapping the worn out bench with a brand new one from Snowden. He covered it in gray leather and suede upholstery that closely resembled the old material’s color. The door panels were also reupholstered to match.

Chris Stafford clocked back in for work inside of the cab by first installing a new dash and then creating custom kick panels that house Powerbass component speakers. A Sony head unit and a combination of amps and subs were also wired up to give the single cab a robust, well-rounded sound signal. While he was at it, Chris replaced the headliner and made new visors to complete the fully renovated interior space. It now looks as factory as you can get save for the Billet Specialties steering wheel and Dakota Digital VHX gauges—but even those blend in all too well.

It’s always cool to see these Indy 500 trucks pop up at shows, and it’s even better when the right sets of hands not only expertly restore them but also go the extra mile by adding subtle custom touches to elevate their original style and performance. Ty’s Chevy maintains the classic Indy truck appearance but has gained heightened appeal with its lower, more capable suspension, premium wheels, and its clean-as-hell interior space. The rebuilt 350 and restored exterior ensure that this commemorative edition Chevy will remain on the road and stay relevant for a long time to come.

TRUCK SPECS

Owner

Ty Zito

1993 Chevy 1500 Indy pace truck
Relaxed Atmosphere
Prairieville, LA

Engine

1993 Chevy V-8 350ci
Engine buildup/modifications by Joe Gerbitz & Mikey Stinson
Comps Cams camshaft
Ceramic coated headers
Custom 3-inch exhaust system by Brent Kelly at Exhaust Pros, McComb, MS
Edelbrock air cleaner
New valve covers
1993 Monster 4L60 transmission by 3rd Coast Customs, Mt. Hermon, LA

Chassis & Suspension

Frame modification by Chris Stafford at C/K Syndicate, Tylertown, MS
Stock 1993 chassis
Weld-in notch under bed
Stone Fab coilover conversion w/ narrowed A-Arms and front sway bar
Aldan American coilovers up front, rear adjustable shocks
Belltech flip kit and rear sway bar
Rearend narrowed 3 inches by Jeremy at BH Fabrication

Wheels, Tires & Brakes

22-inch Intro ID313 wheels
285/35/22 Lionhart LH-TEN tires
Little Shop MFG drilled and slotted front brakes, rear disc brake conversion, NBS master cylinder swap

Body & Paint

Summit White and Tuxedo Black by T.J. Maples & Joe Gerbitz @ 3rd Coast Customs
Slosh Tubz faux metal wheel tubs and fillers
OEM grille and bumpers restored
Classic Parts of America stock style replacement headlights
Spray-in bedliner

Interior & Stereo

Shop: Lawrence Bergeron @ LB Upholstery, Kentwood, LA
Bench seat from Snowden custom seats
Gray leather and suede upholstery
New dash, dyed panels, custom kick panels and stereo install by Chris Stafford @ C/K Garage
Dakota Digital VHX gauges
Billet Specialties steering wheel
Sony head unit
Powerbass component speakers, subwoofers and amps

A Fresh Update to Your OBS Grille

August 22, 2022 by OBS HEADQUARTERS

Step one was to rewind the front of the 1999 Suburban back to 1993 pace truck standards with a few upgrades. After a quick call to LMC Truck, the crew had all the necessary conversion parts, including a grille shell, billet insert, lower grille filler, turn signal lamps, side marker lamps, front fender extensions, and the correct front bumper. At some point in its life, Brik Yrd had been converted with a 1993 GMC grille with the correct lower grille filler and fender extensions and a smooth, front work-truck bumper with no strips or guards. This is a simple conversion. All OBS grilles are interchangeable from OBS ’88-’98 with the correct corresponding year’s parts. Follow along as the team brings Steve’s vision to reality.

’89 Chevy Cheyenne C1500 | Red Ryder

June 6, 2022 by Chris Hamilton

On Every Kid’s Wish List in the 1990s

How many of you wanted a Red Ryder BB gun after “A Christmas Story” appeared on TV when you were a kid? It was one of the most influential movie scenes in the ’80s, and to this day it still plays nonstop during the holiday season.

Few things stick around for that long and still hold sentimental value to millions of people around the country. Show anyone in your family a picture of a stock ’88-’98 GMT400 truck, and we promise at least one of them has a great story involving one of them. Either it’s your grandpa who used one as a farm truck his whole life and watched the sunset in it with his wife for the past 30 years, or it’s your mom who met your dad in their parent’s work truck on a Friday night. Everyone has a memory that involves this all-American Bow Tie, and this particular shortbed is no different.

Dylan Eaton from Spring Hill, Florida, grew up with this exact truck—well, a stock daily-driven version of it at least. His dad picked it up from the dealership new in 1989 and drove it until 2008 when he gave it to Dylan. This was the first truck Dylan ever owned, and he wanted to prove he cared about it as much as his dad did. Now after a little over eight years and around $25,000 dollars or more, Dylan is proud to tell the story of this long-time family member. He knew the path he wanted to take when he started customizing. A daily driven, big power, thick tire street machine. Nothing more and nothing less. He wants to jump the truck at any time and have a strong crank. No special fuel and no pre-charging, just a ready and reliable show truck.

Because it was so well maintained since its time on the showroom floor, the exterior of the truck only needed some fresh paint and a few simple upgrades. A Street Scene front grille with billet inserts was installed, the factory bumpers were shaved and painted, the bed rail stake holes were shaved, and a steel roll pan was welded and smoothed in. Finally, the whole truck was painted Viper Red by Donnie Peake of Peake’s Autobody Inc. To get the stance correct, Dylan and his dad installed a 5-inch front and 7-inch rear suspension drop that included DJM Control Arms, Belltech coil springs, new spindles, a rear flip kit, C-notch for the rear frame rails, and Belltech Street Performer shocks. They also bolted on a 1.375-inch front sway bar with polyurethane bushings and body mounts as well as a Calvert Racing Caltrac bar.

The power plant on this sweet OBS is an ’87 GM roller block SBC 355ci V-8 built by Mark’s Performance and Machine in New Port Richey, Florida. The block was balanced, blueprinted, decked and line honed. It was also bored 0.030 over and has a Pro Meth methanol injection system. Eagle connecting rods, Comp Cams nx276hr camshaft, JE Pistons, Total Seal rings and King bearings complete the internals, and it’s all bolted together with ARP bolts and studs. Under the block is a Morosso oil pan. Topping off the engine build are Air Flow Research Eliminator 180cc heads, a polished 192-intake 16-rib supercharger from The Blower Shop, a Devane “Weekend Warrior” 930cfm carburetor, and Hooker Headers. These bolt up to Hooker Max Flow mufflers and flow out the back of the truck. An MSD ignition keeps the timing in check and an American Powertrain “White Lightning” Tremec 5-speed transmission with hydraulic throwout bearings and a SPEC Type 3 clutch wrap up the drivetrain.

All this power is sent back to the 14-bolt 5-lug 454SS rearend with 3:73 gears. Some 17-inch American Racing Torq Thrust 2 wheels are at each corner with a 17×7 up front and 17×9.5 in the rear. The Michelin Pilot Sport 4s tires give Dylan the traction he needs and the SSBC Big Bite brakes stop him when he steps on the pedal. The SSBC rear disc brake conversion and SSBC adjustable proportioning valve give him all the braking power he needs for this beast of a truck.

This truck is on every grown kid’s Christmas list, and you don’t have to worry about shooting your own eye out with a truck like this—although you may break a few necks when you drive by.

Truck Specs:

Dylan Eaton
’89 Chevy Cheyenne C1500
Spring Hill, Florida

Chassis/Suspension

5-inch front and 7-inch rear suspension drop
DJM control arms
Belltech springs and spindles
Belltech flip kit and C-notch
Belltech Street Performer shocks
1.375-inch front sway bar
Polyurethane bushings and body mounts
Calvert Racing Caltrac bars

Engine/Drivetrain/Performance

’87 GM roller block SBC 355ci V-8
Built by Mark’s Performance and Machine in New Port Richey, Florida
Balanced, Blueprinted, Decked, Line Honed
Bored 0.030 over
Pro Meth methanol injection
Eagle connecting rods
JE Pistons with Total Seal rings
King bearings
ARP bolts and studs
Moroso oil pan
Comp Cams nx276hr camshaft
502/520 lift and 276/288 duration
Air Flow Research Eliminator 180cc heads
The Blower Shop polished 192-intake 16-rib supercharger
Devane “Weekend Warrior” 930cfm carburetor
Hooker Headers
Hooker Max Flow mufflers
MSD ignition
American Powertrain “White Lightning” Tremec 5-speed transmission
T56 Magnum with hydraulic throwout bearing
SPEC Type 3 clutch

Wheels/Tires/Brakes

17-inch American Racing Torq Thrust 2 wheels
17×7 front width 17×9.5 rear width
Michelin Pilot Sport 4s tires
224/45/17 front and 275/40/17 rear
SSBC Big Bite brakes
SSBC rear disc brake conversion
SSBC adjustable proportioning valve
14-bolt 5-lug 454 SS rearend with 3:73 gears

Body/Paint

Street Scene front grille
Billet grille inserts
Shaved and painted factory bumpers
Bed rail stake holes shaved
Painted Viper Red by Donnie Peake of Peake’s Autobody Inc.

Interior

454 SS bucket seats
Black with red stitching by Catalina Custom Upholstery in Spring Hill, Florida
Dakota Digital VHX carbon fiber and red gauge cluster
Forever Sharp steering wheel
Sony single din head unit
Factory dash and door panels dyed black

Why Wrap? | A New Suit for Project Artemis

August 11, 2021 by Chris Hamilton

A New Suit for Project Artemis

If you remember from the last issue, we dropped off our 1998 GMC Sierra known as Project Artemis to the amazing minds at Glarb Wrapped and Tate Designs for an overhaul of epic proportions. A combination of a killer design, high quality prints and one of the best installers in the game is all that it took to transform this basic bagged Bowtie into a motorized masterpiece we can’t wait to take to shows. Not only is the design eye-catching and hypnotizing, but it also incorporates LED panels underneath the wrap that light up at the push of a button. Now the name of the truck can be seen at night, which will definitely stand out in the crowd.

Ryan Sandoval from Glarb Wrapped sent his files to We Print Wraps, and within a few weeks we were watching them install a high-quality material that will last as long as paint. With a design this intricate, Ryan only trusted one crew to lead with the install. Tate designs in Ft. Lauderdale, Florida, was proud to participate and happily lead the charge. Tape measures went flying and numbers were being calculated in their heads faster than we could take photos, but there’s a method to their madness that you can only appreciate if you just sit back and watch the process. We were able to hang out with them for the entire week as they sanded, stripped and wrapped the entire truck from bumper to bumper. Their work is amazing, and from what we know it’s second to none. We have a whole new respect for this particular industry, and before you drop your deposit at your favorite paint shop, just give this method of metal masking another look. Check out the steps it takes to prepare these wraps and line them up correctly.

Belltech Lowering Kit | ’96 GMC Sierra C1500

August 9, 2021 by JERRY MCFARLAND

Installing A Belltech Lowering Kit in a ’96 GMC Sierra C1500

When it comes to lowered trucks, the stance is everything! Without the proper stance, the truck will not look good or handle correctly. One company has been getting it right since 1983—Belltech.

Belltech was at the forefront of the sport truck craze in the early ’90s building parts for none other than the GMT400 trucks. The launch of the drop spindle allowed people to lower their trucks while maintaining front-end geometry. They also addressed the rest of the suspension with shackle kits, flip kits and lowering coil springs. All of these components resulted in a ride quality that hadn’t been realized before now.

We recently picked up a 1996 GMC Sierra C1500 as a project truck. It was a bit rough around the edges but had great bones and potential. A little elbow grease and replacing a few things such as the carpet and body side moldings had the truck looking much better than when we bought it. The next step was to address the suspension, brakes and wheels.

To get the stance and look we wanted, we reached out to our friends at Belltech and Ridler wheels. We knew we wanted it to be low, but didn’t want to lay frame. The folks at Belltech recommended a 4/6 lowering kit with their Street Performance shocks part #688SP. We chose the new Ridler 606 gray with milled spoke wheels wrapped in Toyo rubber to round out the look we were after.

While we were tearing into the suspension, we also decided to upgrade the brakes and steering components. We chose drilled and slotted front rotors and a rear disc conversion from Little Shop Manufacturing. To ensure the truck steered straight and true, new steering components and balljoints were in order from Proforged.

All of these parts combined are going to create a truck that handles as well as it looks. Lets dive into what it takes to istall a 4/6 lowering kit from Belltech.

Check out other Belltech lowering tech installs click here!

Sources

Belltech
www.belltech.com
800-445-3767

Ridler Wheel
www.ridlerwheel.com
866-894-3351

Proforged
www.proforged.com
866-464-6553

Little Shop Manufacturing
www.littleshopmfg.com

1996 Chevy C3500 Dually | NO COMPROMIZE

August 6, 2021 by Travis Noack

Mike Barcia Left No Stone Unturned on This Wicked 1-Ton

A DRIVER. Every custom truck enthusiast must have one. The driver is the truck that gets mobbed on the daily work commute and usually gets put through the paces on the weekend hauling the “show truck” around. The driver is never left alone for long, however. It always starts out innocent enough with a drop kit or airbag suspension setup, wheels and tires, and maybe some upgraded audio and simple exterior bolt-ons, but that only lasts so long. Pretty soon, the custom truck freak’s desire to take the build further and further takes over, and what was once the driver becomes yet another show truck. So much for self-restraint!

Mike Barcia out of Tampa, Florida, bought a driver back in January 2001 to tow his full custom Isuzu show truck. The driver came to him in the form of a trade where Mike gave up the title to his bagged ’90 C3500 and some cash for the ’96 four-door that would eventually become No Compromize.

After a weekend of de-grampifying the OBS Crew, Mike set about getting it on the ground. Set up with full air-ride suspension, the truck’s stock black paint eventually gave way to a full color change with a crisp and clean two-tone with traditional flames heating up the beltline coupled with billet interior accents, ear pounding audio and deep detail under the hood. It didn’t take long before the driver became another show truck. So, Mike decided to take the dually off the road and show circuit and build the most radical custom 1-ton on the planet. The Isuzu was sidelined and the dually became the popular girl getting all of the love and attention.

It was February 2003 when Mike and friend and fellow Negative Camber club member Robbie Taylor tore the truck down to perform a traditional 4-inch body drop on it. After the rockers were kissing the Florida asphalt, the truck looked cool but Mike thought, “It’ll just be another bagged and bodied dually with nice paint and a stock frame under it.” So, the decision was made to go for broke and have a full custom chassis built. Also being a fan and regular attendee of ISCA World of Wheels car shows where the best of best show up to compete, Mike knew that if he wanted to play on that level with the truck, then he had to bring his A game.

Enter Jimmy Graham of Jimmy’s Rod N Customs in Edgewater, Florida. Jimmy hand built and fabricated a oneoff custom chassis equipped with a custom built four-link rear suspension. The leadingedge underpinnings feature custom front suspension and shock hoops built from scratch. Not only is the chassis of No Compromize a work of fabrication and design art, but the depth of detail is unmatched.

After Jimmy finished fabbing up the ultimate bones and suspension, Mike took special care to grind smooth all unnecessary roughness, such as the factory ridges on top of the rear differential where the axle tubes meet the pumpkin. Mike and Gerald Ashe welded up all of the seams and grinded all the welds baby butt smooth. Friend and fellow NC club member David “Double D” Dekorver bodyworked the frame before Chris Bareswilt covered the chassis and suspension components in Euro Red. The frame and suspension were painted as opposed to powdercoated for a superior finish, and then Mike wet sanded and polished to perfection.

To keep things extra clean and smooth, all of the wiring was run through the frame rails, the air compressors were plumbed into the chassis tubing, and all of the chromed stainless bolts were clocked the same direction for that extra touch of ISCA detail. Polished stainless hard lines handle fluid transfer to the brakes and transmission, while a fully polished 3-inch stainless exhaust system built by Jimmy Graham with one-off billet chrome plated exhaust hangers built by Tom Hingle of Billet & Acrylic Fantasies kick out the octane co*cktails. Cruising juice is housed in a custom aluminum fuel cell built by Jeff Davy of Devious Customs. The factory rearend was shortened 9 inches and stuffed with shortened Franklin axles while the first set of 24-inch Raceline Ratchet polished wheels mounted on Toyo rubber. Mike even sanded the side walls down for a smooth no-letter look. For an extra touch, Mike reached out to Kennedy Brown from Fat Dog Designs in Jonesboro, Arkansas, to machine one-off billet floating logo No Compromize center caps.

The truck comes to a halt with one-off billet 4-piston calipers and custom slotted and drilled rotors by Aerospace Engineering. Slam Specialties Slam Bags get the meticulously detailed underpinnings on the ground while air management from Accuair sends lift and drop commands from Mike’s itchy trigger fingers. Viair compressors re-supply the tanks.

The factory big block, while mechanically stock, has a bit more bite with a March Pulley Set, Edelbrock Headers and 3-inch custom built stainless exhaust. Making the most noise under the hood is the deep detail, including the smoothed block and heads, paint-matched block, and all of the chromed and polished accents. Mike wanted the world’s finest chrome, so he reached out to Steve from Advanced Plating in Tennessee to get that accomplished. Billet Specialties valve covers cap off the valve train in style, while a custom-built radiator from Performance Rod and Customs keeps the BBC’s operating temps in check. A Wilwood master cylinder kicks fluid to the custom machined calipers allowing them to bite down on the slotted and drilled rotors.

When building a truck of this caliber, getting it this low and expecting it to compete and win on the extremely competitive indoor show circuit, you have to pull out all of the stops. Modifications lead to more modifications to achieve the right fit, the right look, the right form and most importantly the right function! Not only does No Compromize have a detailed to the nines, full-custom chassis, but the envelope was deeply modified as well, demanding a mountain of metal work from the firewall forward.

Blending classic CK lines with more modern Silverado styling, Mike opted to go with a ‘06 Chevy cat-eye front end. Sounds simple, right? But this mod combined with Mike’s obsession to go over the top turned into a five-year fabrication adventure just to make it seamless. Jimmy’s Rod ‘N’ Custom knocked it out of the park again with hammer bending all of the edges for a clean, smooth look. The front fenders were sectioned and lengthened in the front to make them flush with the ’06 Silverado bumper. On the backside, the ’06 fender is joined with the ’96 fender, and the wheel opening had to be cut, sectioned and massaged to make the lines flow proportionately. Moving up, the hood was lengthened on the backside by 10 inches and the windshield wiper cowl area was removed. The side curves of the hood were cut off so that when the hood was opened a clean fender line was achieved. The hood top body lines were then rebuilt and moved in 2 inches per side. The bottom side of the hood was hand built with a bead-rolled insert added for a smooth look and to gain clearance between the top of the intake and the base of the hood. The ’06 Silverado bumper top was chromed and the lower half sectioned and extended by Gerald Ashe so the bottom sat flush with the tarmac when the truck is laid out.

Even before paint was laid down, the engine compartment alone was a work of art in and of itself, with a custom bead-rolled firewall, custom core support and core support bead-rolled sheetmetal cover and bead-rolled fender wells. The radiator and power steering caps were all frenched into the sheetmetal work as well as the hood hinge pockets. To take it one step further, Mike wanted custom billet hood hinges, but he had no clue what he was getting himself into. After commissioning four different machine shops and delaying the build for over a year, Bobby McCurdy finally saved the day. Bobby designed and cut a set of one-off custom billet hood hinges like no other. The truck is basically a highend turn table street rod with a bed on it.

After Jimmy finished the work on the front clip and the engine compartment, it was time to get the cab and bed slick and smooth. Starting with the bed, the fuel door, stake pockets, tailgate handle and taillights were all shaved. A motorcycle style fuel cap was added to the top of the bed rail while one-off custom taillights by Greening Auto were frenched in for stylish stopping. A custom roll pan was built, and the dually fenders were raised 2 inches so the 24-inch Raceline would tuck. Jimmy fabricated new bead-rolled sheetmetal to the front outside bulkhead of the bed, and the factory dually fender marker lights were shaved in favor of custom one off machined replacement. Jimmy kept the tools burning by fabricating a push-button tailgate handle on the inside of the tailgate, rounding all four corners of the inside of the bed, building bead-rolled interior sheetmetal inserts inside the inner bed sides, and building widened bead-rolled inner wheel tubs. It didn’t stop there. The welder kept on blazing with a custom raised and smoothed bed floor panel, both top and bottom, smooth sheetmetal on the inside of the tailgate and bead-rolled billet oval No Compromize insert into the tailgate.

Ever since the truck came off the road and was torn down in ’03, the color of choice for the modified metal was to be red. When it came time for the metal work to be body worked and covered in color, Mike delivered the truck to Justin and Eli Griffin at Twin States Rod Shop in Meridian, Mississippi. Once the truck was arrow straight, smooth and ready for color, it was time for the booth and the ultimate decision on color. Since the chassis was already red and Mike wanted it to stand out, it was decided that the body better be an opposing color. BASF RM products were custom mixed to come up with the custom color nicknamed “SEMA Gray,” and the truck was coated from nose to tail and roof to rocker and the liquid art buried in RM Glamour clear coat.

Completion of the metal work, body work and paint led to wiring before the truck was delivered to the upholstery and audio shop for threads and sounds. Justin and Eli Griffin installed a Painless Performance wiring harness to connect all of the electrical dots and a custom motor wire harness from Tempe Speed & Performance to get the bigblock cranking.

No head turning, jaw dropping and awardwinning custom show truck is complete without a double throw down interior and some tunes to pummel ear drums. Aaron Markwell, Jesse Johannesen and the team of Innerworx in Sarasota, Florida, got down on the cabin of No Compromize with the entire interior inner structure built out of ABS plastic and then cut, shaped, layered and routered out to perfection. Innerworx built the custom dash, door panels, center console, overhead console and the seats. A total of 11 hides of Relicate Napa saddle leather were used to wrap the full custom interior. Mushroom Versaweave textile carpet covers the cab floor. Complementing the supple leather and smooth street rod sculpted styling of the threads is a Flaming River steering column topped by a custom machined 15-inch billet steering wheel. Vintage Air climate control keeps show cruising temps in check while Classic Instruments gauges provide accurate reporting on the big blocks behavioral patterns. Further accenting the cruising chamber are a variety of billet dress-up items from Clayton Machine Works. To finish off the interior, Mike had Jeff Bertrand of J&B Microfinish in Pontiac, Illinois, machine custom billet seat recliner handles to match the door handles, while Tony Pasquini of Automods in Sarasota, Florida, performed the interior leather laser engraving NC logos throughout. Tom Hingle of Billet and Acrylic Fantasies in Vero Beach, Florida, designed and machined more than 100 unique custom billet parts placed carefully and strategically throughout the build to add class and detail at every turn. A keen eye will note the “NC” engraved throughout the billet accents signifying two things—the truck’s name, No Compromize, and Mike’s truck club, Negative Camber.

For cruising beats, Mike went with all Sony components featuring three-way speakers up front, two 10-inch subwoofers in the center console and a sixchanel Bluetooth amplifier with DSP sending the signals.

No Compromize was a 15-year journey in the making from the time Mike tore it down until the day it rolled into the SEMA Show in November 2018. His commitment to the level and quality of the build is self-evident in the finished product. Mike is thankful for the help and support of his wife, Heather, and daughters Madison and Brooke Barcia for allowing him to pursue his dream. Mike would also like to extend his deepest appreciation for the hard work and dedication of the build team, including Justin Griffin, Eli Griffin, Gauge Griffin, Jimmy Graham, Aaron Markwell, Jesse Johannesen, Chris Bareswilt, Gerald Ashe, David Dekorver, Robbie Taylor, Efrain Ramos, Tony Pasquini, Cody Holmes, Chris Douglass, Joe Griswold, Alex Madrigal, Kennedy Brown, Bobby McCurdy, Jeff Bertrand, Andre Brown, Chris Rawlins, Matty Barkley, Anthony DeMichael, Chuck Scheer, Bryan Perreault, Danny Terneus and CJ Fayet. Bad ass trucks, family and friends— what it’s all about!

TRUCK SPECS

Mike Barcia
1996 Chevy C3500 Dually
Tampa, Florida
Negative Camber

Chassis/Suspension

Full custom chassis and suspension by Jimmy Graham at Jimmy’s Rod ‘N’ Customs, Edgewater, Florida
Custom four-link, custom front suspension and shock hoops
Shortened and smoothed rearend
Chassis body worked and smoothed by David Dekorver of Dub D Kustoms
Chassis paint by Chris Bareswilt of Tampa
Slam Specialties slam bags
Accuair air management
Viair compressors
Custom fuel tank by Jeff Davy of Devious Customs

Engine/Drivetrain/Performance

Factory 7.4-liter 454
Edelbrock headers
March Performance pulleys
Custom 3-inch stainless exhaust fabricated by Jimmy’s Rod ‘N’ Customs

Wheels/Tires Brakes

24-inch Raceline Ratchet dually wheels
Custom machined center caps by Kennedy Brown at Fat Dog Designs in Jonesboro, Arkansas
Toyo 255/30/24 tires sanded to remove all logos, letters and numbers
Custom machined billet four-piston calipers, cross drilled and slotted rotors by Aerospace Engineering
Wilwood master cylinder

Body /Paint

’06 Chevy cat-eye front end
Custom built hood hinges by Bobby McCurdy
All curved edges of front sheetmetal
Bead-rolled firewall
Custom core support
Bead-rolled fender wells
Sectioned and lengthened front fenders
Modified wheel well openings
Lengthened hood 10 inches
Traditional 4-inch body drop
Shaved fuel door
Shaved stake pockets
Shaved tailgate handle
Frenched one-off taillights
Raised dually fenders
Custom roll pan
Metal Mods by Jimmy Graham Jimmy’s Rod N Customs
Paint: SEMA Gray by BASF sprayed by Justin Griffin and Eli Griffin at Twin States Rod Shop

Interior

Hand-built dash, door panels, seats and consoles
Relicate Napa saddle leather
Design, fabrication and stitchwork by Innerworx Modern Interior Solutions, Aaron Markwell, Jesse Johannesen and team in Sarasota, Florida
Vintage Air climate control
Classic Instruments gauges
Flaming River steering column
billet from Clayton Machine Works

Miscellaneous Custom Tricks

Interior laser engraving by Tony Pasquini of Auto Mods in Sarasota, Florida
One-off machined parts by Tom Hingle of Billet and Acrylic Fantasies in Vero Beach, Florida
Billet seat hardware by Jeff Bertrand of J&B Microfinish in Pontiac, Illinois
Billet/LED taillights and billet fan shroud by Jesse Greening of Greening Auto in Cullman, Alabama
Chrome plating by Advance Plating
Door moldings and rubbers by Precision Replacement Parts

LS in an OBS | Making the Swap After the Drop!

May 6, 2021 by Chris Hamilton

LS in an OBS…. Making the Swap After the Drop!

Before the pandemic, life was easier in so many ways for so many people. One problem we constantly heard was builders had increased customer orders but couldn’t procure the materials needed for manufacturing, which is what we went through while trying to create content for our tech section.

The last time we visited this particular project was over six months ago with the installation of a QA1 coilover suspension. This 1997 Chevy C1500 now handles like a rail car but lacks the power to really test out the engineering. Yes, we could upgrade the factory 305ci engine to gain a few hundred horsepower, but the time, dollars and effort spent doing that would be on par with a complete LS engine swap. So that’s the route we are going on this build, and we really hope you follow along.

Did I mention we are supercharging it? Now I have your attention!

Our block of choice is a 6.0-liter LS engine out of a 2003 Silverado 2500 HD. We are going to completely strip it down and prep it properly for the big power we expect to get with this ProCharger supercharger system. Along the way, we will strengthen the structure with ARP bolts and paint it nicely to match the rest of the truck. This P-1SC-1 supercharger system from ProCharger is self-contained (SC) and the only gear-driven centrifugal superchargers to feature self-lubrication. SC ProChargers also feature the highest step-up ratio, exclusive billet impellers and the industry’s only billet gearcases for superior rigidity, sealing and appearance.

We are sending the harness to Current Performance Wiring for a complete overhaul. Which will make it plug and play with our 6.0-liter LS. The follow OEM wire colors and use OEM connectors to produce the best quality products. They go through a multi-step quality inspection process that’s guaranteed to meet or exceed even the most demanding show car owner’s expectations. We are replacing this original OEM transmission with a Chevrolet 4L80 transmission to handle the additional power and finishing it all off with some Red Line fluids. Keep in tune with this one because the end result will be something you want to see, we promise!

Current Performance Wiring manufactures custom engine & transmission harnesses for:

’05-Newer LS2, LS3 & LS7 (24 and 58 tooth)
’97-’04 LS1, LS2, LS6
’99-Newer Vortec 4.8, 5.3, 6.0, 6.2
’94-’97 LT1 & LT4
’96-03 Vortec 5.7L 350
Gen V Direct injected LT1, LT4, L83, L86

Check Out A Video: https://youtu.be/EPQQWeW8xFI

SourceS

ARP Bolts
800-826-3045
arp-bolts.com

Current Performance Wiring
727-844-7570
www.currentperformance.com

ProCharger Superchargers
913-338-2886
www.procharger.com

Red Line Oil
800-624-7958
www.redlineoil.com

RIDETECH AIR SUSPENSION | PROJECT ARTEMIS PART 2

April 22, 2021 by Chris Hamilton

Project Artemis Ridetech Air Suspension Install.

A couple of issues back, we introduced you to not only our latest project truck known as Artemis but also a new tech team helping out on this year’s OBS build. SaltWorks Fab in Myakka City, Florida, is known for building some amazing hotrods and trophy-winning showpieces for customers. With way more expendable income than we do, so having the crew take time out of their busy schedule to help us document Artemis’ RideTech suspension swap is an honor we are proud to boast about. So, if you missed the February ’21 issue where we documented the front suspension install, we suggest you head over to www.engagedmediamags.com to buy a copy while you can. In this issue, we tackle the rear of our 1998 GMC Sierra 1500 SLE. A C-notch install and a lot of sweet-looking, well-engineered suspension parts.

We said it in the last issue, but it stands repeating. This is a completely bolt-on air-ride suspension for ’88-’98 Chevy/GMC 2WD trucks.

No cutting the bed floor and no removing the fender liners. Just a C-notch and a quick shave of the bed brace. All the permanent modifications that needed to be made. They’re nothing that would stop us from putting it back to stock one day if we wanted to. Which is what we were looking for in an air suspension system. This Ridetech system also has electronic ride height sensors that set your ride height to whatever PSI you want. This way, even if you have a leak. The system will correct it at the push of a button until you can pull off and make a repair.

The final piece to the new suspension puzzle is picking a wheel and tire package. For project Artemis, we wanted a setup that would allow us to have a super low stance without cutting anything and a decent ride on 40-series tires. If you have any experience with air suspension, county roads and 35-series tires, you will more than likely understand our desires for this driver. The wheels are staggered fit, 20-inch aluminum wheels from US Mags with a width of 8 inches up front, and 9.5 inches in the back. Having a wider wheel in the back not only looks cool, but it also stretches the 40-series tire just a bit to give up some extra clearance out back when cruising low and slow. Now let’s check out the steps to installing the rear of this extremely well-engineered air suspension system for GMT400 trucks.

This is a completely bolt-on air-ride suspension for ’88-’98 Chevy/GMC 2WD trucks. No cutting the bed floor and no removing the fender liners.

THE SPARK SHOW | EVENT COVERAGE 2020

April 21, 2021 by LOGAN WADE

EVENT RAISED $4000 AND 130 FUNKO POP FIGURES FOR POPS FOR PATIENTS

The Sparks Show 2020 at the Sevier County Fairgrounds in Sevierville, Tennessee, brought quite the crowd! This three-day event packed a fun-filled weekend for the whole family. The August show was presented by Sparkles Detail, Fennell Custom Interiors, Minitruckers Union, Jr. Griffey & Son Body Shop and Logan Wade Photography.

The show started on Friday night with an epic pre-party. DJ Maze and OLP were set up at the showgrounds bringing the tunes while Molloy’s BBQ was slinging some mouthwatering street tacos. The night then wound down with a corn hole tournament brought to you by Corey Floyd Photography. Tacos and cornhole: What more could you ask for?

Unfortunately, Saturday morning started with a lot of rain. Despite the rain, the grounds were absolutely packed with amazing rides! The sun finally began to shine in the afternoon as the rain moved out. Everyone dried off their vehicles so they would be prepared for judging. The quality of rides, as well as the people, were absolutely amazing! Adam Tripp, Don Dizzy Davis and the Sparks Show crew immediately got to work knocking out the judging. As the sun began to set at the fairgrounds, the fun wasn’t over yet! The Sparks Show crew shut down the parkway with an epic cruise with a fleet of trucks from No Regrets, Aftermath and several more.

Luckily, Sunday morning brought more sun and no rain. New vehicles and even more spectators started to roll into the fairgrounds. While you walked around the show you could hop under the pavilion to check out all of the awesome auction and raffle items. From the Rose Metalworks panel and custom cornhole board to a Golden Ticket for Minitruck Nationals 2020, this show had it all! Michelle Boone organized the club games while the crew set up for the limbo contest on the far side of the fairgrounds.

This show always raises money or collects donations for a specific charity, and this year they donated to POPs for Patients (www.popsforpatients.org). The Sparks Show was able to raise $4,000 plus approximately 130 Funko Pop figures for donation! As the show began to come to an end, it was time for awards.

The awards were created by Welch’s Chop Shop, Mad House Designs and many more sponsored by Jr. Griffey & Son Body Shop. Darrell Poe was presented with the Best of Show truck. The Best Paint award went to Chris Denton and the Best of Show Car went to David Culpepper with the VW Beetle, a.k.a. Beetlejuice. Josh and Anne Holt took home the OLP Minis On Da Rise award this year. The Club Participation Hammer stayed with Banzai with a total of 23 registered vehicles at the show.

Despite the COVID-19 pandemic and the weather conditions, this was one of the best years for The Sparks Show! Adam and Don aren’t stopping now, so be on the lookout for the Sparks Show 2021!

RideTech Suspension Install 88-98 Chevy OBS CK GMT400 Trucks

December 23, 2019 by Chris Hamilton

Generally, truck trends are unpredictable and cycle quickly through the ranks of the top industry builders and ballers. F-100 bump-sides and pro-touring, patina-paneled C10s are just a few recent examples of popular projects that the average Joe wouldn’t think to produce until they see a fully completed custom gracing the pages of national publications or influential social media channels. These ideas and completed concepts come from the mindset of being unique with the goal of making a statement at massive events like SEMA, LST and Texas Heatwave. With that said, I think it’s safe to say we all see the next major trend hurling down the pipeline like a 6-foot surfer named Bodhi riding a 15-foot wave off Bells Beach during the 50-year storm. (That was a “Point Break” reference if you didn’t catch it. What a great ’90s movie!)

Speaking of the ’90s, if you were a natural born truck junkie finally making it to the legal driving age around those times, you most certainly wanted a Chevy C/K truck since they were literally everywhere. Everyone from utility company employees to school district secretaries used these heavily produced pickups for their day-to-day operations. Even your grandpa’s grocery-getter was most likely an ’89-’98 Chevy. They came in so many different visual styles with factory options galore. Originally designed by Donald Wood in 1983, Chevy was able to move 551,223 of these GMT400 trucks by 1989 alone according to the Standard Catalog, not to mention the popular 454 model released in 1990 that sold 16,953 units over the four years with 13,748 of those units selling in the first year of production alone.

With that heavy of a number, it’s easy to see why we not only saw a massive increase of these trucks in magazines, but also why the custom aftermarket scene is heating up so much right now. These trucks are still pretty easy to come by and the demographic of buyers are slightly older and more well-off than your average new-truck enthusiast. The guys who wanted these trucks in their teens are now older, generally successful and more comfortable than they were at 16 years old. These factors are driving the great custom parts manufacturers to focus on these industry icons to get ahead of the curve.

It’s easy to talk the talk, but it’s far more impactful to walk the walk. So, we put on our Airwalks and jumped into the deep end of desire by picking up a running, driving 1995 Chevy C/K truck from the original owner for a smooth $2,000. Cold A/C and a solid cranking 4.3-liter V-6 gave this truck the appeal, but a full gas tank and a fresh oil change just shows that the previous owner still has love for this 20-plus-year-old family member.

In the next few issues we are going to take you through the process of giving this truck new life on the same old roads it’s been cruising down since its inception, first starting with suspension, brakes and wheels/tires, followed up with a facelift for the ages. The plans don’t stop there, but you’re going to need to stick to the script the see the next steps. If you’re not a subscriber already, I implore you to do so. If this truck doesn’t motivate you to go out and start wrenching on your own project, I’m not sure you picked up the right publication. Now let’s get to the good stuff!

Key features of these brakes:

No need to buy new spindles, just modify current spindles
Uses new calipers, not rebuilt
Precise machined hub
Laser cut mounting bracket
Fits 19-inch wheels and larger
Will work with most aftermarket wheels, since caliper offset is kept to a minimum