no!no! professional hair removal (2024)

FAQ for the no!no! 8800 Series

The red light will turn on if you are not gliding properly. This is a built-in safeguard to ensure proper treatment.
Turn the unit off and then back on. Now, begin treatment again, making sure you glide in one smooth, non-stop motion.

The no!no! 8800 series has several new features

  • Adjustable Treatment Level for a personalized, comfortable treatment.
  • Status Screen
    • Thermicon™ Tip status so you know exactly when to replace the Thermicon™ Tip.
    • Battery level status indicator.
  • Compatible with Thermicon™ Tips for Small & Sensitive Areas. These tips are designed for the safe and effective treatment of facial hair, knees, elbows, the bikini line and other curved and sensitive areas.
  • Rechargeable battery for cord-free operation
  • Slimmer size for a more comfortable grip.

You can use the new no!no! 8800 series everywhere except the genitals and around the nipple area.

When treating the face, be sure to use the narrow Thermicon™ Tips.

This kit includes special Thermicon™ Tips and a small Buffer so you can treat facial hair, bikini lines, elbows, knees and underarms with extra comfort and safety.
The Kit for Small Areas can be used only with the no!no! 8800 series.

Use the narrow tips from the Kit for Small Areas and start at the lowest treatment level. Place no!no! gently against your skin. Glide no!no!, side-ways or in an upward motion over the upper lip. You might need to pull the skin taut to treat every hair. You may raise the treatment level only if it is comfortable for you. If you feel any discomfort, lower the treatment level and be sure you are not pressing too hard against your skin.

These areas of the body are either curvy and/or have delicate skin, making it difficult to no!no! 100% safely. We do not recommend using no!no! in these areas because we consider your safety to be of the first priority.

You may have to recharge your battery.

Charge your no!no! completely (4-6 hours or overnight) before you use it for the first time. Do not use no!no! during the initial charge.

Check your status screen. Recharging is necessary when the empty battery icon is visible and/or the red signal light flickers.

After the initial charge, you may use no!no! while it is plugged in.

Always start with the lowest treatment level, treat a small section and wait a few minutes. Adjust the Treatment Level until it is comfortable for you.

Reset the unit by turning it OFF and then on. You may need to hold the button down for a few seconds. Now, begin treatment again, making sure that when you glide, the Blue Light is continuously ON and does not flicker. If it does, slightly increase the gliding speed until the Blue Light is steady.

If it is turned on properly and still does not start, check the Thermicon™ Tip status from the Status Screen. You probably need to replace the Thermicon™ Tip.

For best results, hair should be between1-3mm long.

Use the standard Thermicon™ Tips that come with your no!no! for large, flat areas like the legs, arms, back and chest.

Use the Thermicon™ Tips for Small & Sensitive Areas (compatible only with the no!no! 8800 series) are for treating small, curved and sensitive areas( like the face, underarms, knees, elbows and bikini line.

  • When the status screen for the Thermicon™ Tips is blank.
  • When the Thermicon™ Tip icon flickers
  • If you notice that it is no longer working efficiently
  • If the wire is damaged in any way

When you glide over those areas, follow the natural curve of the body. You might need to hold the area tight to make sure no!no! is in contact with your skin.

You may need to go over certain areas a few times to catch every hair. But don’t overdo it. After 3-4 passes, take a break and work somewhere else. After your skin has had a few minutes to rest, return to that area to finish the job.

When first starting, some people use a razor after a no!no! treatment to further remove untreated hair. After a short time, this should no longer be necessary.

  • Start with the lowest Treatment Level. Raise the Treatment Level until you reach the highest level without feeling uncomfortable.
  • Hold the area tight to make sure no!no! is in contact with your skin.
  • Press lightly against the skin. Avoid excess pressure.
  • Use the small enclosed Buffer.
  • Use a clean, fresh Buffer
  • Buff lightly against the skin. Avoid excess pressure.

If you choose not to use the Buffer, use an exfoliating cream to remove crystallized hair.

no!no! professional hair removal (2024)

FAQs

Does no no remove hair permanently? ›

Are the results permanent? no!

Why is my no no hair removal not working? ›

Make sure that the power cord is plugged firmly into the device and the electrical wall outlet. Make sure the On/Off button on the Charger is pushed in the On position. Make sure the Thermicon™ Tip is intact. Replace the Thermicon™ Tip if necessary.

How does the no no hair removal work? ›

SHORT, IT'S HEAT. Our patented Thermicon technology uses the scientific principles of thermal transference (also known as heat) to treat unwanted hair. When gliding your handset along the treatment area, gentle heat attaches to the hair follicle, travels below the skin's surface and crystalizes it at the root.

Does no no work on grey hair? ›

no!'s thermicon technology is essentially effective on all hair colours, including brown, black, red, blond, and even gray.

Does no no actually work? ›

I have found away that this works for me and for the purpose of removing peach fuzz its great - but its a REALLY high price to do that. It is not effective enough in my opinion, and when it is it leaves you with stinky skin with ingrown hairs. I use it every week and will continue to as I am in it for the long haul.

What is the most permanent form of hair removal? ›

Electrolysis can permanently remove unwanted hair. Once your hair is gone, you won't need maintenance treatments. It works on all hair types, including light-colored hairs, which lasers cannot remove. There's no downtime.

What happens if hair doesn t fall out after laser hair removal? ›

First, it's crucial to understand that laser hair removal isn't an instant process. The laser works by targeting the pigment in hair follicles, damaging them to prevent future growth. This damage causes the hairs to shed over a period of time, but it doesn't instantly remove them.

Do you need to shave before using Nono? ›

The IPL works by targeting each individual hair follicle, which is why you need to shave beforehand, so the laser is able to get right into the hair and weaken it (and eventually, hopefully, kill it off completely) from the root. It's a relatively painless experience that just feels like a light flick on the skin.

Why is my no no not working? ›

A: Check the On/Off button on the top of your no! no! If the Status Screen is showing, it is "on". If it is turned on properly and still does not start, check the Thermicon™ Tip status from the Status Screen.

How do you use no hair on private parts? ›

Avoid getting Nair inside your vagin*l canal or near your rectum to reduce the chances of infection. Coat the vulva, vagin*l canal, and rectum with a layer of petroleum jelly to prevent the cream from getting inside. After waiting for a few minutes (between 3 to 10 minutes), wipe off the cream with a soft washcloth.

Can you use no no on pubic hair? ›

It can be fitted with a wide tip for removing hair on legs, arms, chest, and back, or a narrow tip for smaller areas such as the face or bikini line. You glide the device over skin at a 90-degree angle. A red light glows if you've gotten it wrong.

What is the secret to no gray hair? ›

"Follow healthy hair habits. Try to avoid repetitive use of heat and chemical treatments which can damage the hair and the pigment cells," recommends Lain. "Limit exposure to, or protect hair from, toxins and pollutants, and when possible, protect your hair from the sun by covering it up with a hat or scarf."

What is the best hair removal for gray hair? ›

Electrolysis is the tried and true method to remove gray hair. It is slower and more painful than LHR but it is permanent and the only way to remove gray hair.

Why isn't hair removal cream working? ›

Leaving the product on longer is likely to result in chemical burns. It's often the case that the depilatory cream doesn't manage to loosen every hair because hair thickness is never completely uniform. That's OK: You can always pluck or shave any strays that get left behind.

Why isn't my laser hair removal working? ›

If you saw a less than stellar result on your last treatments it could have been due to not being in the hair growth stage in the cycle during time of procedure. Hormonal imbalance while undergoing laser treatments can stimulate increased hair regrowth.

Is it normal for laser hair removal not to work? ›

It's extremely rare that laser doesn't work. Although it's known that while for some patients minimal amount of sessions are sufficient for others double the amount may be needed. This can even be the case with your own body, where one area will respond a lot quicker while other prove to be more stubborn.

How long does no hair take to work? ›

No Hair Lotion Hair Remover Original 125ml with moisturising, softening and conditioning baby oil and mild fragrance removes unwanted hair from legs, underarms and larger areas in as little as 3 minutes. It leaves your skin lovely and smooth for longer.

Top Articles
Latest Posts
Article information

Author: Stevie Stamm

Last Updated:

Views: 6033

Rating: 5 / 5 (60 voted)

Reviews: 83% of readers found this page helpful

Author information

Name: Stevie Stamm

Birthday: 1996-06-22

Address: Apt. 419 4200 Sipes Estate, East Delmerview, WY 05617

Phone: +342332224300

Job: Future Advertising Analyst

Hobby: Leather crafting, Puzzles, Leather crafting, scrapbook, Urban exploration, Cabaret, Skateboarding

Introduction: My name is Stevie Stamm, I am a colorful, sparkling, splendid, vast, open, hilarious, tender person who loves writing and wants to share my knowledge and understanding with you.