Earrings are an attractive way to add a finishing touch to any outfit. Pierced ears provide more accessorizing options. However, they also come with a certain level of commitment and care. Keep your ears and pierced ears clean while using sanitary earrings to avoid infection.
Table of Contents
It will be easier to put on your earrings if you take better care of your ears. If your ear holes are spotless and sterile, you won’t have to struggle to get the earrings in. Continue reading this post to get an insight on how to put on earrings.
How to Put Earrings in Pierced Ears?
Putting on earrings is painless once you’ve mastered the trick. Ensure you pierce your ears before putting on earrings – see also how to take off earrings. Visit a mall piercer or a tattoo parlor if you can find one.
Disinfect jewelry before using it. Then, twist each earring into place by sliding it into the lobe. Clip the earring backs on your ears. Make sure the rings are the same size.
There may or may not be a “back half” to some earrings. You should ensure that the metal hook of the earring is firmly inserted into your ear. The clasp is likely positioned on the hoops if you place hoop earrings. A clean, undamaged section of the hoops should touch your ear when sliding the earring into your ear. Look into earring styles that feature removable charms if you want something different from the standard hoop earring. There are two types of dangle earrings: those with permanent pendants and those with interchangeable charms that you can use to achieve various looks.
Why Is It So Hard to Put My Earrings In?
There are various reasons why it can be difficult to insert an earring. Friction between the earhole and earring is the most typical reason that causes pain. You can easily remedy earring posts by applying petroleum jelly to them before inserting them into the ear holes. Petroleum jelly reduces earring friction. However, forcing the earrings into the earlobes will cause skin injury, leading to painful and unpleasant-smelling epidermoid cysts. A cyst forms when you force a viable skin below the skin’s surface. Individuals with earlobe cysts should use petroleum jelly to lubricate their earrings.
Does Putting in Earrings Hurt?
The degree of pain felt in various ear sections is difficult to gauge. The caliber of the piercing needle, the piercer’s ability to accomplish a timely ear piercing, and the client’s fear and expectations all play a role in the client experiencing pain. A professional piercer should be able to complete each piercing in between 0.5 to 1.5 seconds.
Piercing pain is moderate in the specialist piercing world, and cartilage parts are somewhat more painful. However, we must exercise caution when drawing generalizations. For example, somebody with an unskilled lobe piercing may have had greater pain than that one undergoing a professional tragus piercing.
Professional piercers do not use piercing guns; instead, they use needles. The Association of Professional Piercers (APP) forbids non-disposable piercing guns.
People are frightened by the needle, yet it is more accurate and less painful than the gun technique of piercing. In addition, the needle’s specific design allows for greater precision and minimal tissue stress during the procedure.
How to Re-open a Partially Closed Ear Piercing Hole
Your piercings might start to heal and close if you don’t wear earrings regularly. Some scenarios necessitate the expertise of a professional. It is feasible to re-open the ear hole at home by sterilizing the area, working cautiously, and avoiding discomfort and infection. You may re-open your earring hole and resume wearing earrings if you take the time and follow the proper steps.
Keeping Your Ear Lobe Area Sterilized
Step 1: Soften the Skin Surrounding Your Ear Lobe
You can soften your earlobes by pressing warm clothing to them or by having a warm shower before you attempt to re-open the earring hole. It makes it much more convenient to re-open the hole.
Step 2: Use Latex Gloves and Wash Your Hands
To eliminate debris, dirt, and bacteria from your hands, do a thorough hand wash using antibacterial soap and warm water for at least 30 seconds. Rinse and dry your hands well, then put on rubber gloves or latex. It will help to keep the earring hole clean and free of bacteria.
Step 3: Rub Rubbing Alcohol on Your Earrings to Disinfect Them
You can purchase rubbing alcohol, also known as isopropyl alcohol, at your local pharmacy or grocery store. Most fungi, bacteria, and viruses that live on a surface can be eliminated by rubbing alcohol, a powerful disinfectant.
You can clean earrings with thin posts by dampening a cotton swab or a cotton ball with rubbing alcohol. These earrings will open your ear hole. Make sure the current surface is clean before applying any finishing touches. Dry the earrings on a clean surface.
Step 4: Cleaning Your Earlobe
Rub alcohol on a fresh cotton ball or swab to remove dirt from your earlobes. Cleaning the front and rear of your lobe is essential. Pay special attention to the ear hole opening.
Manually Open Earring Hole
Step 1: Feel the Rear of the Earlobe
There may be a small knot where the piercing should be. This is because dead skin cells form a knot, preventing the piercing hole from healing properly. Consider consulting with a specialist to have your ears pierced again if the piercing hole has completely closed up and no longer appears to be visible. Remember that everyone’s recovery time is different. You could be able to re-open the hole after years without wearing earrings, or it may close after months.
Step 2: Lubricating Earlobes
Apply a thick layer of petroleum jelly to the earlobe to cushion the area and minimize friction. Next, carefully apply lubricant to the lobes of your ears with the tips of your fingers. Hand heat helps soften skin.
Step 3: Earring Hole Stretching
Pinch your earlobes’ sides lightly with your fingers and gently pull them in opposing directions. This will open the earring hole a little bit more and push the lubricant into the ear hole. Make sure you don’t apply too much force to your earlobes.
Step 4: Apply a Lubricant to Your Sterile Earring Post
Coat disinfected earring posts with an antibiotic ointment or petroleum jelly. Avoid getting the lubricant on the earring’s front so you can keep a strong grip.
Use thin-post earrings. A somewhat closed ear hole will not allow thick earring posts. In addition, pain or scarring might result from forcing the thick post into your ear hole.
Step 5: Inserting the Earring Into the Pierced Hole
You should be able to wear your earring now. Insert the earring into the front of the ear with one hand while looking at yourself in the mirror. Hold your earlobe with your free hand. Lightly push your thumb on the piercing hole’s dead skin knot.
Step 6: Gently Wiggle the Earring Into the Piercing Hole
Move the earring in a circular movement around the earring aperture. Additionally, you may have to jiggle with the earrings for several minutes before you can get them to slide through the earring opening. Place your thumb below your earlobe so that you can feel where the earring post’s tip is.
Step 7: Push the Earring into the Earring Hole
You should gently push the earring’s post through after you’ve opened it up by twisting it around. Earring backs are a great way to keep your earrings in place.
FAQs: Earring Hard to Put In
How Do You Put On Flat Back Earrings?
You can place the post of the flat-back earring through the ear from the back towards the front. Then you place the earring’s front into the ear post. Adjust the font settings while keeping the flat back into position behind your ear. Earrings with a flat back give your lobes a more polished appearance.
How to Put Earrings in Easily?
Putting in earrings can sometimes be tricky. Follow these simple steps to make the process easier:
- Hold the earring by the post and position it at the entrance of your earlobe.
- Slide the end into your earlobe, pointing first, and gently twist the earring as you insert it. This helps the earring find its way through the piercing.
- If you encounter resistance, Pull your earlobe slightly to widen the hole temporarily, making it easier for the earring to go through.
- Once the earring is in place, secure it by clasping the back or fastening the closure.
How to Put Earrings in A Closed Hole?
If you haven’t worn earrings for a while, your earlobe hole may have closed partially. Follow these steps to insert earrings into a closed hole:
- First, you need to lubricate your ear with a non-antibiotic balm (I use Aquaphor Ointment) this will help to soften the skin.
- Followed by stretching your earlobe to help open up the area and thin the closed piercing hole.
- Now you can carefully push the earring through the back side of the earlobe, you should try from different angles and use gentle pressure until it passes through.
How to Disinfect Earrings without Alcohol?
While alcohol is a common disinfectant, it may not be suitable for all earrings, especially those with delicate gemstones or materials. Here’s an alternative method to disinfect your earrings:
- Boil water – Pour some boiled water into a mug.
- Drop in the earrings – Place your earrings into the mug and let them soak for up to 10 to 15 minutes.
- Boiling water is an excellent way to sterilize earrings at home and eliminate harmful bacteria. Allow the earrings to cool down before wearing them.
How to Keep Your Ear Piercing Open without Earring?
If you wish to keep your ear piercing open but don’t want to wear earrings all the time, you can make it a habit to wear earrings at least once a week to keep the hole from closing up. However, for some individuals, piercings may close up more quickly, so wearing earrings on a daily basis might be necessary. So, if you’ve recently reopened your piercings, wear your earrings consistently for a few days and remember to twist them regularly to keep the hole open.
How to Wear 2 Earrings in One Hole?
Wearing multiple earrings in one earlobe hole can create a stylish and trendy look. You can opt for an ear climber along with an earring that doesn’t sit on the ear, such as a hoop or dangle. However, depending on the size of your piercing, you might need a thinner gauge post or ear wire to comfortably accommodate both earrings.